Casting related products

Aqueous release agent for green sand mold

SHIFT MOLD W-20 (spray over the pattern)

  • aqueous release agent
  • undiluted solution use
  • emulsion type
Aqueous release agent for green sand mold　SHIFT MOLD W-20 (spray over the pattern)

Use
SHIFT MOLD W-20 is W/O emulsion type release agent for green sand mold.
Please used undiluted.
Feature
-Flame retardancy therefore can handle safely.
-High performance on molding and good to release
-Protect from shape collapse
-Make the casting skin smooth and make foundry sand possible to repeat use
-Hazardous substance is not used therefore handle safely.
-It is possible to use by simple stirring if the agent is separated while long store.
Property
AppearanceWhite emulsion
Density15℃　g/cm30.868
Flash pointＰＭ－℃No flash point is recognized due to water boiling only
Viscosity40℃ mm2/s5.1
MoistureWT%25
pHLiquid concentrate7.5
Remarks
-PCA control ・PCA which is called carcinogen is under 3% as per EU standard hence safe.
- Heavy metal which is harmful to human body is not used.
How to use
1.Please use undiluted solution. (do not dilute by water)
2. Please spray evenly onto the surface of the pattern, which makes Green Sand Mold.
3. Spray by each mold. Subject to the condition, spray once per 2~3 mold can be effective.
Packing
18 liter Can
200 liter Drum
SHIFT CHEMICAL CO., LTD.