CHALLENGE TO POSSIBILITY : Shift Chemical Co., Ltd.
- Cleaning agent for furan resin self harding agent
Resin Crusher M
-
- Dissolution agent for furan resin
- Ready to use
- Dissolution agent of adhered sand in furan resin mixer
- How to use
- 1) Brush or paint resin crusher M at the adhered sand in furan resin mixer.
2) Leave it for a while.
3) Sand will be soften and is easy to clean. - Attention
1) This is absorbency solution hence seal the container while store.
2) If contact with skin, clean well immediately.
3) If contact with eye, clean with running water more than 15 minutes and get the medical treatment.
4) Please do not mix with other chemicals or solution.
5) This product is flammable hence need special attentio for fire.
This is low volatility but dangerous if absorb steam in large quantities hence enough ventilation is required while operation. Recommend to use protect musk if operation at long time.6) This solvent is strong solubility against synthetic resin hence be casreful not to touch with synthetic resin materials.
(usable synthetic resin container: Teflon, polyethylene, high degree of polymerization polyvinyl alcohol)
- Property
-
Component Alkyl Amino solvent Appearance Transparent liquid Density20 g/cm3 0.95 Flash pointPM- 57.8 Explosion limit (in atmosphere at normal temperature) 1.8`14 Vol.% - Packing
- 15kg Can
