CHALLENGE TO POSSIBILITY : Shift Chemical Co., Ltd.
- Easy adhered resin sand remover
RESIN REMOVER S
-
- Liquid
- Brush paint/Spray
- Easy adhered resin sand remover
- RESIN REMOVER S is the easy cleaner for adhered resin sand on mixing parts at Self Hardening Sand Mold.
Also RESIN REMOVER S has the effect of the sand adherence prevention. - How to use
- 1. Apply RESIN REMOVER S to adhered resin sand until it soaks properly.
2. Adhered resin sand becomes soft and easily been cleaned. -
Packing 18L can, 500ml bottle, 420ml spray Mode Adhered self hardning resin sand remover Working condition Ready to use Purpose Adhered sand remover in resin mixer Ingredient Main conponent : Conposition of Hydrogen Carbon Characteristic Appearance : Light blue liquid Density (15℃g・cm²） ： 0.80 Flash point PM-℃ : 76 - Precausions
- 1. In case of contact with skin, wash sufficiently with water and soap.
2. In case of contact with eyes, wash with clean water for 15minutes, and receive a medical treatment immediately.
3. Do not mix with other chemicals. It may degradation or react.
4. (ⅳ) Class Ⅲ petroleiums at Japan Fire Service Act. - How to apply
Before remove the adhered sand
Please paint Resin Remover S by brush or spray until soak enoughly.
Wait for about 1 minute
The adhered sand become soft and can be cleaned easily by spatula.
