Casting related products

Aqueous release agent for shell machine

SHIFT MOLD SM-7A (spray over the pattern)

  • aqueous release agent
  • 10-50 times dilution
  • Special silicon as principal component, general use type
Aqueous release agent for shell machine@SHIFT MOLD SM-7A (spray over the pattern)

Use
SHIFT MOLD SM-7A is water soluble release agent used at molding by shell machine.
Please dilute at 10-50 times according to the shot number.
Composition
Special Silicon as principal component and emulsifier, rust preventive agent
Property
AppearanceWhite emulsion
Density15Ž@g/cm31.004
Flash pointCOC ŽNo flash point
Viscosity40Ž mm2/s1.38
pHLiquid concentrate7.2
MoistureWT%82
Remarks
-PCA control EPCA which is called carcinogen is less than 3% as per EU standard hence safe.
- Heavy metal which is harmful to human body is not used.
How to use
1. Please dilute 10~ 50 times by water.
2. Please spray or apply by brush evenly on the surface of heated shell pattern.
3. Please apply once per 10 ~ 30 mold subject to the conditions.
Packing
1 Box (1 liter can X 20)
18 liter Can
SHIFT CHEMICAL CO., LTD.