Casting related products

Prevention of tar adherence on shell mold

Shift Remover NW

  • liquid
  • Air spray gun
  • Prevention of tar adherence on shell mold (used in Hot Working)
Prevention of tar adherence on shell mold @Shift Remover NW

Product Summary
Shift Remover NW prevent the tar adherence on shell mold. If Shift Remover NW is being painted on shell mold, the adhered tar can be easily removed by cleaning. This product can be appilied while the mold is hot and not necessary to detach the mold from the machine.
How to use

1.) Clean the resin tar adherence and paint Shift Remover NW by air spray gun whil the meta mold is hot. (Shake Shift Remover NW well before use)

2.) The coating film will be created on metal mold.

3.) Please use ordinal release agent while shell coa production.

4.) Prevent the tar adherence and easily been removed if appllied.

Characteristic
EStrong adherence with metal mold and creat strong layers.
EContaining graphite, which will prevent tar adherence.
ECan apply at hot mold, which create coating layers. As user cay apply without detach the mold, better efficiency.
ENon dangerous good therefore safe.
Property
Aluminum Phosphate20-30 %
Squamous Graphite20-30 %
Surfactant1-2 %
Water40-60 %
Specific Gravity1.38 (20Žj
Viscosity (FC#4)12.5 second
pH1-2
Flash pointnot been measured
*Caution: Solution is strong acidity hence handle with care.
Packing
4kg can, 16kg can
  
SHIFT CHEMICAL CO., LTD.