*to prevent the slag, the quantity of Slag Conditioner TL is 0.01%~0.02%. Less quantity will less influence to the molten metal and very easy to use.
1. it will save energy cost
2. it will shorten dissolution time
3. extend the life of refractory
4. remove adulterant and clean molten metal
5. reduce NG rate
1. Input the regulated quantity into furnace together with scrap.
Slag Conditioner will melt at 1100℃ and start to softening the slag on refractory lining.
2. Repeat input the requlated quantity of Slag Conditioner into furnace for 5 charges.
3. The slag on refractory lining will be gradually coming up to the surface of molten metal.
4. Take the floating slag out from the furnace.
* The sample and data is prepared. Please e-mai/call us for the enquiries.