Purpose
Wax Slip is a silicone-based release agent used in lost wax casting.
It utilizes specially developed silicone resin that does not contaminate molds or molded products.
It can be evenly applied even to molds with complex shapes, delivering excellent performance.
Features
| Forms a Uniform Release Film | Forms a uniform thin film on the mold surface, delivering excellent release performance. |
|---|---|
| High Adhesion | Uses a high-viscosity resin, providing superior adhesion to the mold surface. |
| Excellent Workability | As a spray type, it allows for even application without unevenness, even in fine details. |
How to use
Spray evenly onto the target area from a distance of approximately 15～20 cm from the mold.
For best results, apply in several light coats to avoid unevenness.
For best results, apply in several light coats to avoid unevenness.
Composition
| Special Silicone | Approx. 5% |
|---|---|
| LPG (Liquefied Petroleum Gas) | Approx. 95% |
General properties
| Appearance | Transparent |
|---|---|
| Viscosity (25°C) | 1000 mm²/s (undiluted) |
| Specific Gravity (25°C) | 0.96 (undiluted) |
Packaging
420ml aerosol spray × 20 cans per case
Applicable Regulations
| Fire Service Act | Transparent |
|---|---|
| Industrial Safety and Health Act | Not applicable |
| Ordinance on Prevention of Organic Solvent Poisoning | Not applicable |
| PRTR Law (Pollutant Release and Transfer Register Law) | Not applicable |
