Aluminum cut wire provides a glossy and smooth surface finish.
The wire material is mainly available in two types: Pure Aluminum (AL1070) and Aluminum Alloy (AL5056).
Pure Aluminum (AL1070) has low hardness, allowing finishing without damaging the surface.
Aluminum Alloy (AL5056) has higher hardness and sharp edges, making it suitable for matte surface finishing.
Other aluminum alloy wire materials are also available upon request.
The wire material is mainly available in two types: Pure Aluminum (AL1070) and Aluminum Alloy (AL5056).
Pure Aluminum (AL1070) has low hardness, allowing finishing without damaging the surface.
Aluminum Alloy (AL5056) has higher hardness and sharp edges, making it suitable for matte surface finishing.
Other aluminum alloy wire materials are also available upon request.
Purpose
◼︎ Deburring and cleaning of die-cast and cast products, removal of stains, adhered release agents, and dirt
◼︎ Widely used as blasting media for shot blasting machines and various other applications
Specifications
| Standard Size | 0.6～2.0 mm |
|---|---|
| Hardness | Pure Aluminum (AL1070): HV 40～60 |
| Aluminum Alloy (AL5056): HV 100～120 | |
| Shape | Cylindrical |
Composition
| Material | Pure Aluminum (AL1070) | |||||||
|---|---|---|---|---|---|---|---|---|
| Si | Fe | Cu | Mn | Mg | Zn | Ti | Al | |
| Pure Aluminum (AL1070) |
0.20 or less | 0.25 or less | 0.04 or less | 0.03 or less | 0.03 or less | 0.04 or less | 0.03 or less | 99.70 or less |
| Material | Aluminum Alloy (AL5056) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Al | |
| Aluminum Alloy (AL5056) |
0.25 or less | 0.40 or less | 0.10 or less | 0.10 or less | 2.2～2.8 | 0.15～0.35 | 0.10 or less | — | Balance |
Packaging
20 kg bag / Flexible container bag / Drum
