Purpose
Used as a coating agent applied to mold surfaces in the casting of high-temperature metals such as cast steel, it improves release properties and helps prevent mold deterioration and gas defects during pouring.
Features
| Excellent Release Properties | Provides strong adhesion to mold surfaces and excellent release performance. |
|---|---|
| Heat Resistance up to 1700°C | Ideal for high-temperature castings such as cast steel. |
| Prevents Deterioration of Mold Surfaces | Forms a durable coating layer that suppresses mold surface deterioration during pouring. |
| Reduces Defects and Peeling | Prevents coating film peeling and the occurrence of gas defects. |
| Water-Based and Non-Hazardous | Water-based for safe handling. |
| Easy to Stir | Low sedimentation ensures easy stirring. |
How to use
・Stir thoroughly before use.
・Remove oil, moisture, and dirt from the mold surface before application.
・Apply evenly by brush or spray.
・After application, ensure the coating is fully dried before pouring.
・As the product is alkaline, wear protective goggles and gloves during use.
・Remove oil, moisture, and dirt from the mold surface before application.
・Apply evenly by brush or spray.
・After application, ensure the coating is fully dried before pouring.
・As the product is alkaline, wear protective goggles and gloves during use.
General properties
| Color | White |
|---|---|
| Viscosity (FC #4) | 70 |
| Specific Gravity | 1.64 |
| Non-volatile Content (%) | 78 |
| pH | 11 |
| Thinner | Water |
| Dilution Ratio | As required |
Composition
Special zirconia, silica, inorganic binder
Composition Table
| Inorganic Binder | 5% |
|---|---|
| Special Zirconia | 30% |
| Silica | 40% |
| Water | 25% |
| Total | 100% |
Packaging
20 kg can
