Purpose
An oil-based release agent used in shell molding machines.
Features
| Excellent Release Performance | An oil-based release agent formulated with special silicone as the main component, offering excellent release performance. |
|---|---|
| Low Residue Type | A low-residue type that minimizes resin buildup on the mold surface. |
How to use
1. Use as-is without dilution and apply evenly to the mold surface by spray or brush.
2. Adjust the application amount according to operating conditions.
3. After use, seal the container tightly and store it away from direct sunlight.
2. Adjust the application amount according to operating conditions.
3. After use, seal the container tightly and store it away from direct sunlight.
General properties
| Appearance | Colorless Transparent Liquid |
|---|---|
| Density (15°C) | 0.815 g/cm³ |
| Flash Point | 57°C |
| Viscosity (40°C) | 6.07 mm²/s |
| Color (ASTM) | L 0.5 |
Notes
◼︎ PCA Control: Uses only raw materials that meet the EU standard (below 3%) for polycyclic aromatic compounds (PCA), which are considered carcinogenic.
◼︎ Free from Harmful Substances: Contains no hazardous heavy metal compounds.
◼︎ Fire Hazard Classification: Classified as a Class 2 petroleum product under the Fire Service Act; handle with care and keep away from ignition sources.
◼︎ Free from Harmful Substances: Contains no hazardous heavy metal compounds.
◼︎ Fire Hazard Classification: Classified as a Class 2 petroleum product under the Fire Service Act; handle with care and keep away from ignition sources.
Storage Conditions
◼︎ Keep away from open flames.
◼︎ Store in a tightly sealed container in a cool, dark place away from direct sunlight.
◼︎ Store in a tightly sealed container in a cool, dark place away from direct sunlight.
Packaging
18L Can
