Purpose
A water-soluble release agent used in shell molding machines.
Features
| Excellent Release Performance | Formulated with special silicone as the main component, providing excellent release performance at high temperatures. |
|---|---|
| Water-Soluble for Easy Handling | The concentration can be adjusted for different applications by changing the dilution ratio. |
How to Use
1. Dilute with water at a ratio of 10 to 50 times before use.
2. Apply evenly to the surface of the heated shell mold using a spray or brush.
3. Reapply every 10 to 30 molds depending on operating conditions.
2. Apply evenly to the surface of the heated shell mold using a spray or brush.
3. Reapply every 10 to 30 molds depending on operating conditions.
General Properties
| Appearance | White emulsion |
|---|---|
| Density (15°C) | 1.004 g/cm³ |
| Flash Point | Not applicable due to water-based solution |
| Viscosity (40°C) | 1.38 mm²/s |
| pH (Undiluted) | 7.2 |
| Water Content | 82 wt% |
Notes
■ PCA Control: Formulated to meet EU standards of 3% or less for polycyclic aromatic compounds (PCA), which are considered carcinogenic, ensuring safe use.
■ Free from Harmful Substances: Contains no heavy metal-based anti-rust agents.
■ Non-Hazardous: Not classified as a hazardous material under the Fire Service Act.
■ Free from Harmful Substances: Contains no heavy metal-based anti-rust agents.
■ Non-Hazardous: Not classified as a hazardous material under the Fire Service Act.
Storage Conditions
■ Store in a tightly sealed container in a cool, dark place away from direct sunlight.
■ Avoid freezing and high temperatures.
■ Avoid freezing and high temperatures.
Packaging
18L Can / 1L Can
