Purpose
SHIFT REMOVER G reduces the adhesion of hardened resin deposits that occur on shell core molds.
Even if deposits do form, they can be removed more easily than before, significantly reducing cleaning time.
Features
| Excellent Anti-Adhesion Performance | Forms a protective film on the mold surface, preventing adhesion of resin deposits and tar. |
|---|---|
| Easy Removal | Even if deposits occur, they become easier to remove, reducing cleaning time. |
| Improved Workability | Easy to apply by spray and dries quickly. |
How to use
1. Clean off any resin deposits adhering to the mold, then apply evenly.
2. Heat the mold to approximately 200°C and dry for about 30 minutes. A transparent thin film (thickness approx. 5 μm or less) will form on the surface.
3. After operation, any adhered resin deposits or tar can be easily removed during cleaning.
2. Heat the mold to approximately 200°C and dry for about 30 minutes. A transparent thin film (thickness approx. 5 μm or less) will form on the surface.
3. After operation, any adhered resin deposits or tar can be easily removed during cleaning.
Composition
| IPA (Isopropyl Alcohol) | 25% |
|---|---|
| Special Silicone | 25% |
| LPG | 50% |
General properties
| Appearance | Colorless Transparent |
|---|---|
| Density (15°C) | 0.90 g/cm³ |
| pH | 6.7 |
Storage Conditions
◼︎ Keep away from open flames.
◼︎ Store in a tightly sealed container in a cool, dark place away from direct sunlight.
◼︎ After use, seal the container tightly to prevent evaporation.
◼︎ Store in a tightly sealed container in a cool, dark place away from direct sunlight.
◼︎ After use, seal the container tightly to prevent evaporation.
Packaging
420mL Aerosol Spray
